Pre l iminar y – Runco VX-2000d User Manual

Page 30

Runco VX-2000d Owner’s Operating Manual

PRE

IMINAR

• Do not drop the remote control or expose it to moisture or high temperature.

• The remote control may malfunction under a fluorescent lamp. If that occurs, move the

DHD Controller away from the fluorescent lamp.

• Make sure that there is nothing obstructing the infrared beam between the remote

control and the IR receiver on the DHD Controller or projector.

• If the effective range of the remote control decreases, or it stops working, replace the

batteries with new ones.

• Ambient conditions may possibly impede the operation of the remote control. If this

happens, point the remote control at the DHD Controller or projector and repeat the
operation.

The signal from the remote control can be reflected by walls or
other surfaces.

Note