Roland FJ-40 - Manual (Page 49)

47
4 User's Reference
4-4 Display Menus Flowchart
For details about each of the menus, see the "4-5 Description of Keys and Display Menus."
W 1234 mm OP2
FINE BI-DIR
Load the material and press
the key
Settings for [OVER PRINT]
OP2 = Twice /
OP3 = Three times
* Not displayed when set to
[NONE]. Printable width of
the loaded material
When the power is turned
on for the first time, or turned
on after removing the ink
Attach the drain tank,
and press [ENTER] key.
The system will execute
ink fill.
No ink is filled.
Select the installed ink
type and press the
[ENTER] key.
The settings for [PRINT QUALITY] (Printing Direction)
display only in the case of [BI-DIRECTION].
Settings for [PRINT QUALITY] (Printing Quality)
PHOTO/SUPER/FINE/NORMAL/FAST/DRAFT
+ key
Roland FJ-50
Ver.1.00
Roland FJ-50
PIGMENT CMYKLcLm
SELECT INK TYPE
PIG.CMYKLcLm
MENU LANGUAGE
ENGLISH
MENU LANGUAGE
JAPANESE
SETUP SHEET
Press the [ENTER] key
to enable the setting.
Use or to select.
Press the
Top
menu
NOW FILLING INK
Roland FJ-50
UNKNOWN INK TYPE
PIG. CMYKLcLm/PIG. CMYKOrGr/
DYE CMYKLcLm
INSTALL
DRAIN TANK
Press the [ENTER] key.
Head cleaning starts.
Press the [ENTER] key
to print a test pattern.
Press the key
HEAD CLEANING
START
HEAD CLEANING
TEST PRINT
PHOTO/SUPER/FINE/
NORMAL/FAST/DRAFT UNI-DIRECTION/
BI-DIRECTION
Press the key
Press the [ENTER] key to enable the setting.
Use or to select.
PRINT QUALITY
FINE PRINT QUALITY
BI-DIRECTION
Selecting the language for screen messages