Roland FJ-40 - Manual (Page 18)

16
2 Basic Operation
2-2 Installing Ink Cartridges
Store ink cartridges out of the reach
of children. If ink contacts the eyes, flush
immediately with water.
Do not remove any ink cartridges except when shipping the FJ-50/40.
If ink runs out, replace immediately with an ink cartridge designed especially for the FJ-50/40 (see "3-1
Replacing the Ink Cartridges"). Do not attempt to refill and reuse an empty ink cartridge.
If an ink cartridge is removed, replace it immediately with a new one.
NOTICE
4 Put a water-absorbent, combustible material such as a
paper or cloth into the plastic bag, and soak up the ink. 3 Close the plastic bag,
and dispose of it as
combustible rubbish.
Combustible
material such as a
paper or cloth
Incineration Combustibles
Do not attempt to disassemble an ink cartridge.
Unused ink cartridges should be stored unopened at a temperature of -20
°C (-4°F) to 40°C (104°F).
If an ink cartridge is dropped, the shock due to the fall may damage the ink cartridge and make it unusable.
- If any ink gets on your hands or clothing, wash it off as soon as possible. Ink stains may become difficult to remove
if allowed to stand.
- Once an ink cartridge has been installed, do not remove it until the ink has been used up. Frequent insertion and
removal may allow air to enter the ink tube and result in a drop in printing quality due to dot drop-out or the like.