Radio Shack TAD-716 - Manual (Page 9)

9
CONNECTING POWER
1. Plug the supplied AC adapter into a standard AC out-
let.
2. Rotate VOLUME counterclockwise until it clicks to
turn on the TAD-716.
The message indicator turns on while the TAD-716
checks for an outgoing message.
If an outgoing message is already recorded, the TAD-716
automatically plays it back. If there is no outgoing mes-
sage, the TAD-716 sounds a beep every 5 seconds until
you record a message (see “Recording the Outgoing
Message” on Page 10).
Note: If the cassette tape is broken or is not inserted
properly, the TAD-716 sounds a continuous low tone
when it is connected to power. To stop the tone, unplug
the adapter from the AC outlet. Reinsert or replace the
tape, then plug the adapter back into the AC outlet.