Radio Shack TAD-716 - Manual (Page 11)

11
4. When you finish recording, release OGM REC . The
TAD-716 plays back the outgoing message to you.
Then it is ready to receive incoming calls.
5. Adjust VOLUME to a comfortable listening level.
You can press OGM REC at any time to hear the outgoing
message. Your outgoing message plays, then the TAD-
716 resets to answer incoming calls automatically.
CONNECTING TO THE PHONE LINE
To connect a telephone to the TAD-716, plug the TAD-
716’s modular cord into a modular phone jack. Then in-
sert the telephone's modular plug into the phone jack on
the back of the TAD-716.