Radio Shack TAD-716 - Manual (Page 18)

18
REMOTE MESSAGE PLAYBACK
1. Call your phone number from a touch-tone phone.
After the TAD-716 answers, it plays the outgoing
message, sounds a series of beeps, then one long
tone. The length of the beeps depends on the num-
ber of messages.
You can leave a flag message up to 1 minute long to
remind yourself that you have heard all the recorded
messages up to this point on the tape.
2. Whether or not you have left a flag message, enter
your three-digit security code (see “Remote Security
Code” on Page 17). The TAD-716 sounds a series of
beeps while the tape rewinds. (If there are no beeps,
enter the code again).
The TAD-716 plays back all recorded incoming mes-
sages, with a short beep between each message.
When all incoming messages have played, the TAD-
716 sounds another series of beeps.
Note: If you hang up while messages are playing, the
machine continues playback until all the recorded
messages have played.