Radio Shack TAD-716 - Manual (Page 22)

22
The TAD-716 does not
respond to any button. Turn on the TAD-716 by
rotating VOLUME counter-
clockwise so the message
indicator lights.
Reset the TAD-716 by
unplugging the AC adapter
from the AC outlet then plug-
ging it in again.
Outgoing message sounds
distorted. Rerecord the message.
Speak clearly into the micro-
phone at a normal volume
from about 12 inches away.
Incoming messages sound
distorted. Clean the head using a tape
head-cleaning kit (see
“Cleaning the Tape-Handling
Parts” on Page 25).
Unplug the adapter from the
AC outlet, replace the tape,
then plug the adapter back
into the AC outlet.
Problem Solution