Radio Shack TAD-716 - Manual (Page 10)

10
RECORDING THE OUTGOING
MESSAGE
Before you can use the TAD-716, you must record the
outgoing message. The maximum length for your outgo-
ing message is 60 seconds.
Hint: To help protect your home or office, do not tell call-
ers you are away. Instead, say you cannot come to the
phone at this time.
Follow these steps to record an outgoing message.
1. If the TAD-716 is off, rotate VOLUME counterclock-
wise until it clicks to turn it on. The message indicator
turns on.
Note: If the new message indicator is flashing, press
PLAY to play all messages before you record a new
announcement. Recording an outgoing message
erases any stored messages.
2. Lift open the cassette compartment door.
3. Hold down OGM REC .
When the message
indicator begins flash-
ing, speak clearly
towards the built-in
microphone.