Radio Shack Auvio 40-294 - Manual (Page 10)

10
S
e
tu
p
4 Connect Power
Connect the plug to the soundbar first, then connect AC plug to the power outlet.
5
Install Remote Control Batteries
1. Press the tab to remove the battery cover.
2. Insert two AAA batteries (not supplied) as indicated
by the polarity symbols (+ and –) marked on the
remote control.
3. Replace the battery cover.
b
Battery Notes:
Dispose of batteries promptly and properly. Do not
burn or bury them.
Use only fresh batteries of the required size and
type.
Do not mix old and new batteries, different types of
batteries (alkaline, or rechargeable), or rechargeable batteries of different capacities.
If you do not plan to use the remote control for a long time, remove the batteries.
Batteries can leak chemicals that can damage electronic parts.
6
Setting the Clock
1. In standby mode, press DISPLAY/TIME on the remote control. The first hour digit
flashes.
2. Press  or  to adjust each hour and minutes digits.
3. Press  or  to move to the hour or
minutes digit you want to adjust.
4. Press DISPLAY/TIME to save your settings.
5. Press REPEAT/ST on the remote control to
select 12 h or 24 h time format.
12:00
AM
AAA
AAA

