Ricoh Caplio R6 - Manual (Page 83)

81
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
You can select [1 SEC.], [2 SEC.], [4 SEC.], or [8 SEC.] for time
exposure.
By using long time exposure, you can capture the movement of
moving subjects such as the trail of fireworks and car lights when
shooting a night scene.
1
Switch the mode selector to 5.
2
Press the MENU/OK button.
• The shooting setting menu is displayed.
3
Press the " button to select [TIME EXPOSURE] and
press the $ button.
4
Press the !" buttons to select
the desired setting.
5
Press the MENU/OK button, or
# button and press the MENU/
OK button.
• The setting appears on the screen.
Note ----------------------------------------------------------------------------------------------
• When using long time exposure, the shutter speed may slow down and images may
be blurred. Hold the camera steady by using a tripod when shooting.
• The camera shake correction function cannot be used when using long time
exposure. If long time exposure is set while the camera shake correction function is
turned on, E changes to F.
• While shooting with long time exposure, the LCD monitor turns off.
• When time exposure is set, the function to remove noise from images operates.
Therefore, up to four additional seconds may be required in addition to the time set for
time exposure.
Using Long Time Exposure
(TIME EXPOSURE)