Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting ID - Manual (Page 16)

16 Operation
Transferring a Call Between the
Handset and Base
You can use the phone’s intercom feature to
transfer a call between the handset and the
base.
To transfer a call from the handset to the
base, press
INTCM . The call is placed on
hold, and Paging Base and Hold appear.
When the person at the base answers, press
TALK . The call is released from hold and
transferred to the base. To return to handset
use, press
TALK or INTCM .
To transfer a call from the base to the hand-
set, press
INTCM/PAGE . The call is placed on
hold, and Paging and Hold appear. When
the person with the handset answers, press
SPEAKER . The call is released from hold and
transferred to the handset. To return to the
base use, press
SPEAKER or INTCM/PAGE .
MEMORY DIALING
You can store up to 30 numbers in memory
(20 in the handset’s and 10 in the base’s
memory), then dial a stored number by
pressing a memory location number.
You can also store a name with each number
in the handset’s memory.
Use the supplied memory directory sticker to
record your stored numbers. Peel the back-
ing from the sticker and attach it to the
base’s handset cradle.
Storing a Number in the Handset’s
Memory
Notes:
• The phone beeps five times and exits
the storing process if you wait more than
20 seconds between each keypress.
• If you receive a call during memory
entry, the phone exits the storing pro-
cess.
Follow these steps to store a number in the
handset’s memory.
1. Lift the handset.
2. Hold down MEM until Memory Store
and a list of memory location numbers
appear.
3. Press a number ( 01–20 ) or press VOL/
CID
8 8 8 8
or
9 9 9 9
to choose a two-digit mem-
ory location. Precede a single digit loca-
tion number with 0 — 01, 02, 03, and so
on.
4. To store a name, press SELECT/CHAN-
NEL . Store Name appears.
If you do not want to enter a name, skip
to Step 6.
5. To enter a name, press VOL/CID
8 8 8 8
or
9 9 9 9
to select the characters. Press
6 6 6 6
or
7 7 7 7
to move the cursor left or right.
Repeatedly press VOL/CID
9 9 9 9
to view
the characters in alphabetical order.
(The display shows uppercase letters
first, then lowercase letters, numbers,
and special characters.)
Notes:
• Press VOL/CID
8 8 8 8
to see the charac-
ters in reverse alphabetical order.
• You can hold down VOL/CID
8 8 8 8
or
9 9 9 9
to scroll rapidly through the charac-
ters.
• If you make a mistake, move the cur-
sor over the error, then enter the cor-
rect character, or press
DEL to delete
a character. To delete all the charac-
ters, hold down
DEL for at least 1 sec-
ond.
43-5520.fm Page 16 Friday, July 21, 2000 8:01 AM