beautypg.com

A quick look at the handset, Setting the dialing mode – Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting ID User Manual

Page 11

background image

11

Installation

A QUICK LOOK AT THE HANDSET

Note: The handset window has a plastic film on it to protect it during shipment. Carefully peel
off the film before using your phone for the first time.

SETTING THE
DIALING MODE

Set

DIAL

MODE

on the back of the base for

the type of service you have. If you are not
sure which type you have, once the battery
pack is fully charged, do this test.

1. Be sure

DIAL

MODE

is set to

T

(tone).

2. Lift the handset, press

TALK

, and listen

for a dial tone.

3. Press any number except 0.

Note: If your phone system requires that
you dial an access code (9, for example)
before you dial an outside number, do

Press INTCM to page someone at
the base or transfer a call to the
base (see “Using Page/Intercom” on
Page 15).

Use TALK to make a
call (see “Making and
Receiving Calls” on
Page 13).

Use CALL ID to review
the Caller ID records.

Use MEM to store or recall
names and numbers in memory
(see “Memory Dialing” on
Page 16).

Press DEL to Delete Caller ID
records (see “Deleting Caller
ID Records” on Page 20) or to
erase information if you make
a mistake.

Press VOL/CID

8

8

8

8

or

9

9

9

9

to adjust

the handset volume (see “Adjusting
the Handset Volume” on Page 13),
set the ringer tone/volume (see
“Setting the Ringer Tone/Volume”
on Page 12), view Caller ID records
(see “Caller ID Operation” on
Page 19), or select options.

Press SELECT/CHANNEL to
select the phone’s channels
(see “Selecting the Channel”
on Page 13) and other options.

Press RDL/PAUSE to select a phone
number so you can redial it (see
“Using Redial” on Page 14) or store
a pause in a number (see “Entering
a Pause” on Page 18).

Press FLASH to use
the phone’s flash
function (see “Using
Flash” on Page 15).

Press

*

TONE

6

6

6

6

to use your phone

company’s special tone services on
a pulse line (see “Using Tone Ser-
vices on a Pulse Line” on Page 15).

Press MENU to use the telephone
company’s network service (see
“Using the Phone Company’s Net-
work Service” on Page 21).

43-5520.fm Page 11 Friday, July 21, 2000 8:01 AM