Rhinotek RHINO FL20 - Manual (Page 81)

Assembly Section 3-11
ASSEMBLY
FL20M/FL14M 10/03
ASSEMBL
Y
© 2004 Alamo Group Inc.
CHAIN GUARD ATTACHMENT
The placement of the Chain Guards corresponds to the Rubber Deflector Attachment with the exception
of the Front Center Section see FIGURE 16. Attach all Chain Guards with bolts and locknuts specified
in the parts list.
FIGURE 16. Front Chainguard attachment
COUNTERWEIGHT ATTACHMENT (OPTION - Two Section Cutter)
For the two section cutter the Counterweight Attachment (1) must be installed to the left side of the
Center Section with the Hinge Pin and Retaining Pin (Follow the Wing Attachment in this section). Fill
the Counterweight completely FULL of Concrete FIGURE 17. Attach the Skid Shoe (2) to the Counter-
weight with the Bolt (4), Nut (5) and Washer (6). Attach the Chainguard (3) to the Counterweight with
Flatwasher (6), Lockwasher (7) and Nut (8). FIGURE 18
Fill With
Concrete
1
FIGURE 17. Counter Weight
FIGURE 18. Counterweight
Chainguard Attachment