Ricoh CAPLIO G4 WIDE - Manual (Page 179)

Appendices
179
Playback/Deleting
Symptom Cause Measure Page
Cannot Playback. Or
the Playback screen
does not come out.
It is not set to 6 (Playback). Turn the Mode Dial to 6 (Playback Mode). P.90
The AV cable was not connected properly. Reconnect it properly. P.99
The video format is set wrong. Set to correct format.
The contents of SD
Memory Card cannot
be replayed, or the
replay screen does
not appear.
A Memory Card is not loaded. Or a Memory Card with
no stored images is loaded.
Load a card with stored images. P.16
You played back a Memory Card that was not format-
ted by this device.
Load a card that was formatted and stored on by this
device.
P.114
You played back a Memory Card that was not
recorded normally.
Load a normally recorded card. P.16
The Memory Card's contact surfaces are dirty. Wipe with a soft, dry cloth. -
There is something wrong with the Memory Card. Play another card and if there is nothing wrong with it,
the camera is OK. There may be something wrong
with the card, so do not use it.
-
An image
disappeared.
Batteries are running low. If using alkaline batteries, replace with a new set.
If using rechargeable batteries, recharge or use the
AC Adapter.
P.10
P.11
P.12
The camera was left unattended and not used, so Auto
Power-Off shut it off.
Turn the power back on. P.14
Files cannot be
deleted.
The file has been set to protect. Release the protection. P.104
The SD Memory Card is "locked". Release the "Lock (write-protection)". P.16
Cannot format a
Memory Card.
The SD Memory Card is "locked". Release the "Lock (write-protection)". P.16
Other Problems
Symptom Cause Measure Page
Cannot load the Mem-
ory Card.
The card is facing the wrong way. Load correctly. P.16
Even when the cam-
era's buttons are
pressed, it does not
operate.
Batteries are running low. If using alkaline batteries, replace with a new set.
If using rechargeable batteries, recharge or use the
AC Adapter.
P.10
P.11
P.12
Camera Malfunction. Turn the power off once, turn it back on and switch to
5 (Still Image).
P.14
P.8
Remove batteries once and load them again.
Reconnect the AC adapter cable properly, if using.
P.10
P.11
P.12
The date is wrong. The correct date/time are not set. Set the correct date/time. P.15
The date set has dis-
appeared.
The batteries were removed. If the batteries are removed for about two weeks, the
date setting will be lost. Make the settings again.
P.15
Auto Power-Off does
not work.
Auto Power-Off is set to OFF. Set the time for Auto Power-Off. P.116
The beep does not
sound.
The camera is set to silent. Set the beep to ON. P.117
Images do not appear
on the TV.
The video format is set wrong. Set to correct format. P.123
The cable is not connected. Reconnect the cable properly. P.99
The TV in/out switch is incorrectly set. Check that the TV in/out switch is set correctly. -