beautypg.com

Installing your vmax361, Let’s get started – Roadmax VMAX361 User Manual

Page 10

background image

INSTALLING YOUR vmax361

LET’S GET STARTED!

• 3 •

ROADMAX vmax361

Owner’s Manual v1.1

DO NOT install your vmax361 on or in

deployment zone of your vehicle’s airbag units.

!

3. Fit bottom of vmax361 unit into

lip of holder.

4. Push top of unit into holder until

locking tab “snaps” into place.

7. Adjust the viewing angle of your

vmax361 system, and you’re

ready to power up!

A Windshield Mount. B Dashboard Mount.

(Use dust-free cloth to clean mounting surface.)

1. Installing the unit suction mount:

5. Flip out rear GPS antenna.

6. Plug 12v Power adapter to both

the Unit and Lighter outlet of your

vehicle. Red LEDs on both your

vmax361 and lighter plugin show

that your unit is properly

connected and charging.

Push suction

lever

Push suction

lever down

Mounting disc

2. Install the unit cradle holder onto

the suction mount.

Push in and slide down.

Windshield Mount*

Dashboard Mount

*(Antenna angle should be horizontal to sky)

(Plug into

bottom of unit.)

B

A

Adjust viewing angle using

both hands to prevent unit

from dislodging.

om - roadmax vmax361 - 5x5 version.qxp 9/25/2006 3:32 PM Page 3