RCA M4002 - Manual (Page 11)

10
Connecting the Player to the
Computer
Connect the player to your computer with the
USB cable provided. The player will turn on
automatically. In Windows XP and when Windows
Media Player 10 or above is installed, the player
will appear as a Windows portable device using
the Media Transfer Protocol (MTP). If Windows
Media Player 10 or above is not installed or if
your computer is running Windows 2000, the
player will be connected in Mass Storage Class
(MSC) mode. It will appear as a drive letter on
your computer and behave as a detachable drive
for file transfer in one or both directions.
Charging the Battery
Your player is charging through the USB
connection when it is connected to your
computer. To fully charge the player, make sure
your computer is on and the player is connected
for at least 3 hours.
Important Battery Information
Caution: Risk of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
• Charge the player for at least 3 hours before
first use.
• Charge the player for at least 3 hours after
putting away the player for a long time.
• Battery replacement should only be made by
trained technicians. Refer to Limited Warranty
for details.
• Do not attempt to open the player. No user
serviceable parts inside.
• To reduce risk of injury, charge only
rechargeable batteries recommended by the
manufacturer for this player. Other types of
batteries may burst causing damage and
personal injury.
Caution
• The battery used in this player
may present a risk of fire,
explosion, or chemical burn if
mistreated. Do not separately
recharge, disassemble, or expose
to high temperatures. Examples of high
temperatures that may damage your product
include leaving it in a locked car in the
summer, or putting it on top of other heat
generating electronic devices (such as power
amplifiers and computer monitors).
• Do not place the battery under
direct sunlight or in excessively
hot places over 45ºC (113ºF) such
as the dashboard of a car.
• Dispose of used battery properly.
Keep away from children. Do not
disassemble and do not dispose of in fire.
EN
Connecting to the Computer
Warning:
• The USB cable provided is dedicated for
this player only. DO NOT connect this
player to the computer with any other
USB cable. DO NOT plug this USB cable in
other USB devices.
• The USB cable provided may damage
other products if plugged into the
earphones jack.
Note:
• It might take several seconds for the
player to be detected. Click Refresh in My
Computer or Windows Explorer to make
sure the player has been detected.
• The player is capable of transferring files
at USB 2.0. If USB 2.0 port is available on
your computer, use it to connect to your
player. The player is still backward
compatible with the older USB 1.1 ports.
However, you will not be able to take full
advantage of the potential speed increase.
COMPUTER
USB PORT
The Player
!