beautypg.com

Connections & setup, The jacks on the back of the dvd player, Description of jacks (from left to right) – RCA RC5920P User Manual

Page 20: 18 chapter 1

background image

Connections & Setup

18

Chapter 1

Pr

Pb

Y

COMPONENT

VIDEO OUT

S-VIDEO

VIDEO

OUT

VIDEO

AUDIO

OUT

L

R

COAXIAL OPTICAL

The Jacks on the Back of the DVD Player

When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to Right Audio, etc.

Description of Jacks (from left to right)

COMPONENT (Y, P

B

, P

R

) VIDEO OUT

Use these jacks to connect to a TV with component video input jacks. Unlike a single video input,
component video maintains the video signal as three separate signals through these three jacks. This
connection provides optimum quality. To ensure maximum picture quality, use three video-grade cables for
the Y, P

B

, and P

R

connections. Note that it is essential to match the color-coded connectors with a

compatible TV.

VIDEO OUT

If you are using color-coded red, yellow and white RCA cables, connect the yellow video cable to this jack
and to the Video Input jack on your TV.

S-VIDEO OUT

If your TV has an S-Video jack, you can connect an S-Video cable for increased video quality. The S-Video
cable only carries the picture signal; remember to connect the left and right audio cables.

AUDIO OUT

Insert audio cables (left and right) from the FRONT R (right) and L (left) jacks on your DVD player to the
corresponding Audio Input jacks (left and right) on your TV or receiver.

DIGITAL AUDIO OUT

Use a digital optical or coaxial cable (not provided) to connect your DVD player to a compatible Dolby
Digital or DTS receiver or decoder.

Digital

Audio Out

Audio

Out

Component

Video Out

Video

Out

S-Video

Out