beautypg.com

Connections & setup, Dvd player + tv with audio/video input jacks, 13 2b 2a – RCA RC5920P User Manual

Page 11: Chapter 1 9, Go to page 20, Tv dvd

background image

Chapter 1

9

Connections & Setup

DIGITAL OUT

OPTICAL

COAXIAL

AUDIO OUT

2

1

R

L

S-VIDEO

VIDEO

OUT

VIDEO

Pr

Pb

Y

COMPONENT

VIDEO OUT

COMPONENT

VIDEO OUT

L

R

L

VIDEO IN

AUDIO IN

ANT IN

S-VIDEO

TV

AUDIO OUT

R

L

DVD
PLAYER

CABLE

OR

OFF-AIR

SIGNAL

DVD Player + TV with Audio/Video Input Jacks

1.

Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD Player, and to the corresponding Audio Input jacks on your TV.

2.

Connect the video cable.

A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of

your DVD Player, and to the Video Input jack on your TV.

OR

B. S-Video – (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S-

VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV
doesn’t have S-Video, use the basic video connection listed above.

OR

C. Component video (optional, not shown in illustration) – If your TV has component video (Y, P

B

, and

P

R

jacks) use video-grade cables for the Y, P

B

, and P

R

connections. Note that it is essential to match the

color-coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic
video connection or the S-Video connection listed above.

3.

Plug in the AC power cord into an AC outlet.

Note: Your cable or off-air connection to the television should not be affected by this connection.
Connect your cable or off-air antenna to your television as you normally would. You may need to
consult your television manual for details.

Go to page 20

TV

DVD

1

3

2B

2A