RCA RC5920P - Manual (Page 19)

Chapter 1 17
Connections & Setup
DVD Player + TV + VCR + Satellite Receiver
1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
OR
B. S-Video – (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO
OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn’t
have S-Video, use the basic video connection listed above.
OR
C. Component video (optional, not shown in illustration) – If your TV has component video (Y, P
B
, and
P
R
jacks) use video-grade cables for the Y, P
B
, and P
R
connections. Note that it is essential to match the
color coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic
video connection or the S-Video connection listed above.
3. Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on the
VCR.
4. Use a coaxial cable to connect the antenna output on the VCR to the antenna input on the TV.
5. Plug in the AC power cord into an AC outlet.
Go to page 20