1) connecting to a 100-pin lcc socket, Caution – Renesas Emulation Probe M30850T-EPB User Manual

Page 38

Text mode
Original mode

( 38 / 76 )

(1) Connecting to a 100-pin LCC Socket

When connecting the emulation probe to a 100-pin LCC socket (Yamaichi Electronics Co., Ltd.:
IC61-1004-051 etc.) on the target system, following the procedure below.

(1) Attach the CN2 side of the M30850T-EPB to the CN2 side of the M30800T-PTC.
(2) Attach the M30800T-PTC to the 100-pin LCC socket.

Figure 3.11 Connecting to a 100-pin LCC socket

CAUTION

Notes on Connecting the Target System:

• Take care not to attach the converter board in a wrong direction. It may cause a fatal

damage to the emulator.

• The small connectors of the M30800T-PTC are guaranteed for only 50 insertion/

removal iterations.

• For purchasing the IC61-1004-051 or for technical information, contact Yamaichi

Electronics Co., Ltd.

http://www.yamaichi.co.jp/e/index.shtml