Radio Shack PRO-2053 - Manual (Page 27)

27 Special Features
frequency. The scanner locks out the fre-
quency, then continues searching.
Notes:
• The scanner does not store locked-out
frequencies during a search.
• You can lock out as many as 50 fre-
quencies in each bank. If you try to lock
out more,
) ) ) ) appears.
• If you lock out all frequencies in one
search bank and only this search bank
is activated,
ãCCý I8E> ãCCý I8E> ãCCý I8E> ãCCý I8E>
appears and the scanner does not
search.
Reviewing Locked-Out Frequen-
cies
To review the frequencies within a search
bank that you locked out:
1. Press SEARCH to set search mode.
2. Press FUNC then L/OUT . The locked-out
frequency and (F:BFLKý C@JK (F:BFLKý C@JK (F:BFLKý C@JK (F:BFLKý C@JK appear.
Press
8 8 8 8
or
9 9 9 9
to review the list. The
locked-out number and the total locked-
out number also appear as
(у+э 44э F= (у+э 44э F= (у+э 44э F= (у+э 44э F=
55 55 55 55 . (The tenth of thirty locked out num-
bers would appear as (у+э стэ F=э пт (у+э стэ F=э пт (у+э стэ F=э пт (у+э стэ F=э пт .) If
the search bank has no locked-out fre-
quencies,
!DGKPôý (F:BFLKý C@JK !DGKPôý (F:BFLKý C@JK !DGKPôý (F:BFLKý C@JK !DGKPôý (F:BFLKý C@JK
appears. Press FUNC then L/OUT again
to cancel reviewing locked-out frequen-
cies.
Clearing a Locked-Out Frequency
To clear a locked-out frequency, select that
frequency (see “Reviewing Locked-Out Fre-
quencies”), then press
CLEAR .
If all locked out frequencies are cleared with-
in a bank,
!DGKPôý(F:BFLKýC@JK !DGKPôý(F:BFLKýC@JK !DGKPôý(F:BFLKýC@JK !DGKPôý(F:BFLKýC@JK appears.
Clearing All Locked-Out Frequen-
cies in a Search Bank
1. Press SEARCH .
2. Select the search bank in which you
want to clear all locked-out frequencies.
3. Press FUNC then press L/OUT . Lockout
list appears.
4. Press FUNC then 6 . áFE=@IDý C@JK áFE=@IDý C@JK áFE=@IDý C@JK áFE=@IDý C@JK
:C<8Iåý :C<8Iåý :C<8Iåý :C<8Iåýññññæ5!/ôý,I ж5!/фэ,I ж5!/фэ,I ж5!/фэ,I
appears. Press 1 to clear all locked-out
frequencies. (@JKý :C<8I<; (@JKý :C<8I<; (@JKý :C<8I<; (@JKý :C<8I<; appears for
about 2 seconds. Press any key other
than
1 to cancel clear.
Note: You cannot clear all locked-out fre-
quencies if all frequencies in the selected
bank are locked out.
PRIORITY
In addition to the 300 programmable memory
channels, the scanner has one priority chan-
nel.
With the priority feature, you can scan
through programmed channels and still not
miss an important or interesting transmission
on a specific channel. When priority is turned
on, the scanner checks that channel every 2
seconds, and stays on the channel if there is
activity until the activity stops.
Notes:
• The priority feature does not operate
while the scanner receives a trunking