Radio Shack Digital Answering System with Big Button Trim Phone - Manual (Page 18)

18 Telephone Operation
ˆ
Telephone Operation
SETTING THE PULSE/TONE SWITCH
Set PULSE/TONE on the handset for the type of service you
have. If you are not sure which type you have, do this test:
Lift the handset and set PULSE/TONE to TONE . When you hear
the dial tone, press any number other than 0 .
Notes:
• If your phone system requires that you dial an access code
( 9 , for example) before you dial an outside number, do not
press the access code either.
• # does not function when PULSE/TONE is set to PULSE .
If the dial tone stops, you have touch-tone service. Leave
PULSE/TONE set to TONE .
If the dial tone continues, you have pulse service. Set PULSE/
TONE to PULSE .
SETTING THE RINGER
To turn off the telephone’s ringer, set RINGER to OFF . You can
still make outgoing calls and, if you hear an extension phone
ring, you can still answer calls. To turn on the telephone’s ring-
er, set
RINGER to HIGH or LOW for high or low ringer volume.
43-3804.fm Page 18 Thursday, July 6, 2000 2:35 PM