Roberts Radio CRD40 - Manual (Page 30)

29
Sleep function
Your clock radio can be set to turn off after a preset time has elapsed.
The sleep setting can be adjusted between 0 and 90 minutes in 10 minute
increments.
1. To set the desired sleep time, press the Sleep button to enter the
sleep setup. "Sleep 90" will be displayed.
2. Repeatedly press the Sleep button to adjust sleep countdown time
ranging from 0-90 minutes in 10 minute increments. If the radio is in
standby mode when the sleep button is fi rst pressed then it will be
switched on for the selected time. If the radio is already on, then it will
simply switch off after the selected time.
3. During countdown period, press Sleep button to view countdown time
left.
4. Your radio will switch off after the preset sleep time has elapsed.
5. To cancel the sleep function before the preset time has elapsed, press
the Standby button or the Snooze button. To cancel the sleep timer
and leave the radio switched on, repeatedly press and release the
Sleep button to set the sleep timer to 0 minutes.
1
2,3
5
5