Roberts Radio CRD40 User Manual

Page 12

Manual Tuning - DAB

Manual tuning allows you to tune directly to the various DAB Band III
channels. UK DAB stations are located in the range 11B to 12D.

1. Press and release the Menu button until the display shows "Station

order".

2. Press

the

Skip Up or Down buttons until "Manual tune" appears on

the display. Press and release the Select button.

3. Press

the

Skip Up or Down buttons to select the required DAB

channel.

4. Press and release the Select button the open bar in the middle shows

you the minimum signal strength needed for good DAB reception. The
signal bars will go up and down showing the changing signal strength
as you adjust the wire aerial or your clock radio position.

5. Press and release the Select button to return to normal tuning

mode.

Signal strength display - DAB

1. Press and release the Select button the lower line of the display

shows signal strength. Position your radio and angle the wire aerial
for best reception using the signal strength display as a guide. Move
your radio around and position so as to give maximum number of
black rectangles on signal strength display.

2. The clear unﬁ lled rectangle indicates minimum signal level required for

satisfactory reception. Press and release the Select button to return
to normal tuning mode.

1,2

2,3

2,4,5