Roberts Radio CRD40 - Manual (Page 15)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
14
Manual tuning - FM
1. Press the Standby button [On/Off on remote control] to switch on
your radio.
2. Press and release the Function button to select the FM.
3. Fully extend the wire aerial for FM reception.
4. Repeatedly press the Skip Up and Down buttons to tune to a station.
The frequency will change in steps of 50kHz on FM.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set the Volume to the desired settings.
7. To switch off your radio press the Standby button.
1
2
4
4
6
7