beautypg.com

Stereo link, Examples of connections, P. 14) – Roland KC-880 User Manual

Page 14

background image

14

Stereo Link

What’s Stereo Link?

This lets you use two KC-880 units to form a stereo PA system having a high output of 320 + 320 watts.

This feature is called “Stereo Link.”

Two different connection methods are available for Stereo Link: basic connection using one 1/4” phone cable, and advanced connection

using two 1/4” phone cables.

Making the connections using two 1/4” phone cables enables you to take full advantage of the mixing features of the two KC-880 units.

1. Basic Stereo Link

If you want to connect input sources

to the KC-880 (L)

Up to five input devices can be connected.

fig.stereolink-1.eps

1.

Connect the devices to the KC-880 (L).

2.

Connect the STEREO LINK OUT R jack on the
KC-880 (L) and the STEREO LINK IN jack on
the KC-880 (R).

3.

Turn on both KC-880 (L) and KC-880 (R).

4.

Adjust the volume levels on all devices.

5.

Adjust the KC-880 (L) and KC-880 (R) volume
levels separately using their [VOLUME]
knobs.

If you want to connect input sources

to the KC-880 (R)

As described in step 2 of example 1, connect the R side’s STEREO

LINK OUT L jack to the L side’s STEREO LINK IN jack.

2. Advanced Stereo Link

This arrangement lets you play in stereo, making maximum use

of the two KC-880s’ mixer functions (with ten inputs).

fig.stereolink-2.eps

1.

Connect the devices to the KC-880 (L) and KC-
880 (R).

2.

Connect the STEREO LINK OUT R jack on the
KC-880 (L) and the STEREO LINK IN jack on
the KC-880 (R).

3.

Connect the STEREO LINK OUT L jack on the
KC-880 (R) and the STEREO LINK IN jack on
the KC-880 (L).

4.

Turn on both KC-880 (L) and KC-880 (R).

5.

Adjust the volume levels on all devices.

6.

Adjust the KC-880 (L) and KC-880 (R) volume
levels separately using their [VOLUME]
knobs.

About the Volume and Tone Settings

Adjust the R and L volume levels separately using their [VOLUME] knobs.

You can adjust the EQUALIZER ([LOW]/[MIDDLE]/[HIGH] knobs) independently for the L and R sides.

Basically, they should be set to the same positions, but you can adjust each one as necessary to suit the needs of a particular setup.

Examples of Connections

STEREO LINK

OUT R

STEREO LINK
IN

CH 1-4

AUX IN

KC-880

(L)

KC-880

(R)

STEREO LINK

IN

STEREO LINK

IN

STEREO LINK
OUT R

STEREO LINK
OUT L

CH 1-4

AUX IN

CH 1-4

AUX IN

KC-880

(L)

KC-880

(R)

KC-880_e.book 14 ページ 2009年1月6日 火曜日 午前10時26分