Roland KC-880 - Manual (Page 11)

11
Names of Things and What They Do
13
14
12 11 10 6 8
7
9
AUX IN/MONITOR IN
This adjusts the volume level and other settings of a device connected to the AUX IN/MONITOR IN.
You can also use this to input guide clicks from a drum machine, metronome, or other such device (monitor feature).
[LEVEL] Knob
This adjusts the volume level of a device connected to AUX IN/
MONITOR IN.
Turning the knob clockwise increases the volume.
*
Leave the [LEVEL] knob set at 0 (zero) when you’re not using
AUX IN/MONITOR IN.
[MUTE] Buttons
These make the setting for using AUX IN as MONITOR IN.
Switching on the [MUTE] buttons stops output from the unit’s
speakers or LINE OUT of the sound from the device connected to
AUX IN.
This can be useful when you’re using clicks or other guide sounds
from a metronome or other equipment.
SPEAKER:
Switching this on mutes output from the unit’s speakers of the
device connected to AUX IN.
LINE OUT:
Switching this on mutes output from the LINE OUT of the
device connected to AUX IN.
* Sound is always output to headphones, regardless of the
settings of the [MUTE] buttons.
What’s the Monitor Feature?
During stage performances, this feature lets the performer input guide
clicks needed for playing in sync with a sequencer or other sounds that
people other than the performer are not meant to hear, and play them
so that only the performer can monitor them.
The KC-880 uses a mute feature that lets you select and mute out the
output of audio signals input to AUX IN/MONITOR IN.
Usage Example 1: Using the KC-880 as a dedicated monitor-
speaker amplifier in a public address (PA) system (p. 15)
Input the guide clicks or the like to AUX IN/MONITOR IN and switch
on the MUTE [LINE OUT] button.
The guide clicks are output from the built-in speakers and
headphones, but not from the LINE OUT jack.
*
The performer monitors the sound using the built-in speakers.
Usage Example 2: Using the KC-880 as the main PA device (p. 15)
Input the guide clicks or the like to AUX IN/MONITOR IN on the unit
and switch on the MUTE [SPEAKER] button.
The guide clicks are output from the LINE OUT jack and
headphones, but not from the built-in speakers.
*
The performer monitors the sound using headphones.
6
7
VOLUME
[VOLUME] Knob
This adjusts the volume level of speaker output.
12
POWER
[POWER] Switch
This switches the unit’s power on and off.
When it’s on, the POWER indicator lights up.
POWER Indicator
13
14
PHONES
[PHONES] Knob
This adjusts the volume level of headphones output.
11
KC-880_e.book 11 ページ ２００９年１月６日 火曜日 午前１０時２６分