Roland KC-880 - Manual (Page 12)

12
Names of Things and What They Do
Jack Panel
1 2 2 2
6
7
7 8
PHONES
PHONES Jack
Accepts connection of stereo headphones.
This not only enables use for practice at night or
other situations where quiet is required, but also
lets you monitor guide clicks.
*
Connecting headphones doesn’t cut off the
sound from the speaker.
* Always be sure to lower the [PHONES] knob to 0
(zero) whenever connecting headphones.
1
AUX IN/MONITOR IN
Here is where you can connect a CD or MP3 player, an external mixer, or other line
equipment.
You can also use this as MONITOR IN for connecting a drum machine, metronome, or
other device for producing guide clicks.
AUX IN/MONITOR IN (AUX 1–3) Jacks
Here is where you can connect a CD or MP3 player, an external mixer, or other
line equipment (-20 dBu).
Three types of jacks are provided (1/4” phone, RCA phono, and stereo mini), and
mixing is carried out internally.
Simultaneous connections are possible, but the volume level will be lower
compared to single use.
2
FOOT SW
FOOT SW Jack
Connecting a footswitch pedal enables you to switch the internal effects (EFX) on
and off and adjust the speed of the rotary effect using your foot.
An optionally available latch-type footswitch pedal (BOSS FS-5L or FS-6, available
separately) and cable (Roland PCS-31, available separately) are required.
EFX ON/OFF:
Each press of the footswitch pedal switches the internal effects on or off.
SPEED (SLOW/FAST):
Switching on the footswitch pedal sets the rotary at high speed (FAST).
*
When a monaural cable is connected, EFX is switched on and off using the
footswitch pedal. The SPEED setting is changed using the control panel.
* When EFX has been switched off using the footswitch pedal, effects remain off
even if the [EFX] knob on the control panel is operated.
* Varying the setting of the [SPEED] button on the control panel changes the
speed of the rotary effect, regardless of any SPEED setting made using the
footswitch pedal. This may result in the footswitch pedal and the [SPEED]
button being at different settings, but this isn’t a malfunction. Depressing the
footswitch pedal once clears this state (but this doesn’t change the speed of
the rotary effect).
ON/OFF SPEED
PCS-31
* Set the FS-5L’s polarity
switch as shown below.
* When making the connection using
the FS-6, set the POLARITY and
MODE switches as shown below.
White Red
PCS-31
White Red
B A
SPEED ON/OFF
6
AC Cord Cord Hook (p. 6)
KC-880_e.book 12 ページ ２００９年１月６日 火曜日 午前１０時２６分