RCA SPS36123 - Manual (Page 30)

29
LiSTENiNG TO THE RADiO
Presetting Stations
The unit can store a total of 60 stations in memory (30 FM, 30 AM). Presetting allows you to tune in to a
station directly.
Tuning in to a Station manually
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote
control) until the radio frequency appears on the front panel display.
2. Press the /AM/fM button to select AM or FM.
3. Press the TUNiNG buttons on the remote control to tune in to
a desired station.
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote control) to RADIO.
2. Press the /AM/fM button to select AM or FM.
3. Press the number button on the remote control to select the preset number.
Tuning in to a Preset Station
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote control) to RADIO.
2. Press the /AM/fM button to select AM or FM.
3. Press the PREV/ NEXT button repeatedly to select the number of the preset station or use the
numeric buttons to enter the number of the preset station.
Searching for a Station Automatically
• Press and hold the CH / CH button on the front panel or the TUNiNG buttons on
the remote control until the tuner starts searching for a station, then release. After tuning in a station, the
search stops.
• The search may not stop at a station with a very weak signal.
4. Press the TUNiNG buttons to tune in to a desired station.
5. Press the MEMORy button twice on the remote control.
6. Repeat steps 2-5 to store other stations.
Fm Stereo
Press the MTS button on the remote control until “ ” appears on the
front panel display.
Weak Fm stations
Press the MTS button on the remote control until “ ” appears on the
front panel display. Background noise will be reduced. To restore stereo
reception, press the
MTS button on the remote control to select “ ”.
• For preset numbers 1 to 9, simply press the number button on the remote control.
• For preset numbers 10 to 30, enter the two-digit numbers.
For example, to enter 18 by pressing “1” & “8”.
• When MUTE is pressed, the sound is mute and the “L O” indicator
always blinks on the LCD display until MUTE is pressed again or VOL
is pressed.
For Better Reception
FM: Fully unwind the FM antenna wire. Then extend the FM antenna wire and place it in the position that
sounds best.
AM: Fully unwind and rotate the loop antenna then position it for the best reception.
NOTE: Do not connect the FM antenna to an outside antenna.
RCA SPS36123 Eng IB W011.indd 30 8/18/2009 4:30:03 PM