RCA SPS36123 - Manual (Page 25)

24
ATSC TV mode:
Press the DiSPLAy button, the upper window will pop up, then press the DiSPLAy button again, the lower
window will pop up. Press the DiSPLAy button once to exit.
NTSC TV mode:
Press the DiSPLAy button, the below window will pop up, then press the DiSPLAy button once to exit.
USiNG THE TV
4.0 CC OFF
720x480I Stereo Canada Eng C8+
5.1
xxxxxxxx
CC OFF xxxxxxxxxxxxxxxxx
Bad
HD 1920xX1080i Audio 1/2 TV-PG/
2009/07/31 07:00 AM 07:00 AM-07:30 AM
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Channel Skip
1. Press TV MENU button.
2. Use the or button to select TV.
3. Use the or button to select Channel Skip.
4. Press the button to enter.
5. Press the or button to select a channel.
6. Press the button to select the last channel of the page; press
again to go to the next page. Press the button to select the
first channel of the page; press again to return the previous
page.)
7. Press the ENTER button to shift between On / Off. (Select On to skip the selected channel. )
8. Press the TV MENU button to return to the previous menu.
9. To exit the MAIN MENU and return to the normal screen, press the EXiT button on the remote control.
Channel Label
You can edit a label for each channel.
1. Press
TV MENU button.
2. Use the or button to select TV.
3. Use the or button to select Channel Label.
4. Press the button.
5. Use the or button to select the number or letter. Use the
or button to move and edit the next character.
6. Press the ENTER button to confirm.
7. After editing, the Channel and Channel Label will be shown on the screen when you press the DiSPLAy button.
Watching Television
Viewing a television station after the auto/manual search for channels.
1. Press the
fUNCTiON button to TV mode.
2. Press the CH buttons to select a channel, or press the number
button on the remote control to select the channel you want
to watch. Or you may press the
ENTER button to show the
Channel List, then use the or button to select a previous
or next channel.
• For channels 1 to 9, enter one-digit channel number.
• For channels 10 to 99, enter the two-digit channel number.
• For channels 100 or over, enter three-digit channel number.
NOTE:
• When a channel is selected, the channel number is displayed in the top right corner of the screen. This
number will disappear after a few seconds.
• When MUTE is pressed, the sound is mute and the “L O” indicator always blinks on the LCD display until
MUTE is pressed again or VOL is pressed.
MENU Return Adjust Select
X
Picture Audio Time Setup Parental TV
MENU Return Adjust Select
No. Program Name Skip
2.0 xxx On
3.0 xxxxx Off
4.0 xxx Off
5.0 xxxxxx On
6.0 xxxx Off
7.0 xxx On
8.0 xxxxx On
Picture Audio Time Setup Parental TV
NO. NAME
xxx xxxxx
xxx xxxxx
xxx xxxxx
Prev Next
Channel List
RCA SPS36123 Eng IB W011.indd 25 8/18/2009 4:30:00 PM