2 to quit, press, Testing ports, Quit more – Reliable Data-Logger DL-04 User Manual
Page 30
Reliable Scale Corporation
Model DL-04 DATA-LOGGER
User Manual
Page 30 of 38
Rev. 1.70
5.3.5 Port Test
Proper port operation can be tested using the Test Port Function option
in the Port Config Menu. This function should not be used when
connected to the measurement devices as they can be damaged. This
can be a useful troubleshooting tool if device communications
problems arise and should only by used by trained personnel. A test
string will be transmitted by each port using its current settings.
1. From the Port Config Menu, select Port
Test
PORT CONFIG MENU
5 Port Test
6 Exit Port Config
Select # more:
S
Testing Ports.
F4
: Quit more:
S
2 To quit, press
F4
.