Roland VP-7 - Manual (Page 8)

8
1 [Volume] Knob (p . 16)
This adjusts the overall volume of the VP-7.
2 MIDI Indicator
This will light when messages are received from the MIDI IN con-
nector.
3 Level (Tune) Indicator (p . 26)
This indicates the microphone input level (index markings at the
right).
When you turn the [TUNE] knob on the rear panel, this will indicate
the current tuning for several seconds (index markings at the left).
4 [Mic] Knob (p . 17)
This adjusts the microphone input level.
5 [Harmony] Knob (p . 23)
This adjusts the balance between the unprocessed vocal from the
microphone input (the direct sound) and the Human Voice/Vocal
Designer/Vocoder sound.
6 [Ambience] Knob (p . 25)
This adjusts the depth of Ambience.
7 [Vocoder] Button (p . 20)
Press this to select Vocoder sounds.
By pressing the [Vocoder] button you can cycle through the vocoder
sounds (three types).
While holding down the [Vocoder] button, you can press one of the
Human Voice buttons or Vocal Designer buttons to select variations
(seven types).
8 [Bypass] Button (p . 24)
This mutes (silences) the Human Voice/Vocal Designer/Vocoder
sound, so that only the direct sound from the microphone will be
output.
9 Human Voice Sound Buttons (p . 18)
Use these buttons to select a Human Voice.
10 Vocal Designer Sound Buttons (p . 19)
Use these buttons to select a Vocal Designer sound.
11 Headphone Jack (p . 12)
Connect headphones to this jack.
Top Panel
7 2 3 1
8
6 5 4
9 11 10
Names of Things and What They Do