On mac os x – RCA 360 User Manual
Page 48
4 Support
E-DOC-CTC-20031204-0011 v2.0
46
3
The SpeedTouch™ CD Browser menu appears:
Click Diagnostics & Maintenance.
4
The following window appears:
Click Upgrade My SpeedTouch™ to start the SpeedTouch™ Upgrade wizard.
“ Upgrade procedure” on page 47
to continue.
On Mac OS X
Proceed as follows:
1
Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive.
2
Open the CD-ROM and browse to the osx folder.
3
In the osx folder double-click upgradeST.pkg to install the SpeedTouch™ Upgrade
application.
Note
The installation wizard may prompt you for authentification. If this is
the case, click to enter your credentials.
Note
If your computer runs Mac OS X v10.3, your computer may prompt
you to run a program to determine if the installer package can be
installed. If this the case, click Continue.
4
After installation go to the Applications > Speedtouch folder on the system startup
disk (usually the location where you installed the SpeedTouch™ Upgrade applica-
tion) and double-click SetupST. to start the SpeedTouch™ Upgrade wizard.
5
The Choose Language window prompts you to select a language.
Select the language of your choice and click OK.
Note
The selected language will also be used as default language in the
SpeedTouch™ web pages. See
for more infor-
mation on how to change the web page language.
“ Upgrade procedure” on page 47
to continue.