beautypg.com

Dip switches – Ricoh IS450 User Manual

Page 57

background image

43

DIP Switches

DIP Switches

Only the settings of DIP switches 1 through 3 can be changed. Do not change the settings of the
other switches.

Important

❒ If multiple scanners with the SCAM function enabled are connected on the same daisy

chain, the host will not be able to recognize the IDs. In this case, set DIP switch 1 to
“ON”(SCAM function disabled), and set the SCSI ID with the rotary switch.

❒ If the daisy chain is too long, or if a nonstandard SCSI cable is used, misoperation may

occur during synchronous transfer. In this case, set DIP switch 2 to “ON” (SCSI
synchronous transfer disabled).

❒ If this scanner is connected in the middle of a daisy chain, set DIP switch 3 to “ON”

(internal SCSI terminator off).

Leave these set to “OFF;” do not

change.

OFF: Internal SCSI terminator on

ON:

Internal SCSI terminator off

OFF: SCSI synchronous transfer

enabled

ON:

SCSI synchronous transfer

disabled

OFF: SCAM function enabled

ON:

SCAM function disabled