Ricoh IS450 - Manual (Page 2)

Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To
get maximum versatility from this machine all operators should carefully read and follow the in-
structions in this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information
related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes:
Some illustrations might be slightly different from your machine.
Certain options might not be available in some countries. For details, please contact your local
dealer.
Important
Parts of this manual are subject to change without prior notice. In no event will the company be
liable for direct, indirect, special, incidental, or consequential damages as a result of handling or
operating the machine.
Using a cable that is not an ANSI-compliant shielded SCSI-2 cable could result in misoperation
and / or generate radio waves that exceed the limits of the EMC Directive .
When the machine is moved from a cold location to a warm location,condensation will form on
the inside of themashine. Wait 1 hour or more before turning on the machine to allow the
condensation to evaporate.
Power Supply
1. Power requirements: 220-240 V, 50/60 Hz, 5A or more.
2. Insert the power plug securely into the wall socket.
3. Make sure that the wall outlet is near the machine and readily accessible.
4. Do not connect other equipment to the same socket.
5. Do not step on or set anything on the power cord.
6. Do not connect other equipment to the same extension cord.
7. Be sure that the power cord is not in a position where it would trip someone.
8. The wall outlet must be easily accessible.
9. Do not damage, break or make any modifications to the power cord. Do not place heavy ob-
jects on it, pull it hard or bend it more than necessary. These actions could cause and electric
shock or fire.
10. Do not plug or unplug the power cord with wet hands or an electric shock might occur.
11. When you move the machine, unplug the power cord from the wall outlet to avoid fire or
electric shock.
12. When you pull out the plug from the socket, grip the plug to avoid damaging the cord and
causing fire or electric shock.