RoyalTek RBT-2300 - Manual (Page 9)

9
2.5.4. STEP 4: Connect to your Navigation
Software
Load your GPS mapping or routing software, along with the
corresponding maps of the areas that you are occupying or
plan to travel to.
Start the application. Make sure the application is set for the
COM port that your Bluetooth-enabled mobile device will use
for serial communication. Now you should be ready to use
your GPS application as directed by the user documentation
that came with the software. More configurations may be
necessary.
Refer to the following software application user manual to set
up the parameters of the device via Bluetooth radio.
2.6 How to replace Lithium-ion Battery
Open the bolt on the bottom cover of RBT-2300 and take the
Lithium-ion battery out.
Place new Lithium-ion battery into the room of RBT-2300.
The RBT-2300 Lithium-ion battery is replaceable and
rechargeable.
The RBT-2300 Lithium-ion battery can last more than 8 hours in
continuous operation mode.
2.7 How to use Car Charger to charge
your handheld device
Connect car charger into your adapter connector of RBT-2300.
Plug adapter connector into handheld device connector and plug car
charger into cigar-lighter.