RoyalTek RBT-2300 - Manual (Page 44)

How to install the locr GPS Photo software
If you want to download, install, and use the locr GPS Photo software
you need an account and a password, so sign up (“How to sign up at
locr”).
To install the locr GPS Photo software, you can download and open the
installation program from the locr web site.
Download and install the GPS Photo software from the locr
web site
• On the locr web site ( http://www.locr.com ) click on “Downloads”
and follow the instructions on the screen.
• To install the locr GPS Photo software, double-click the
“locrGPSPhoto.exe” file.
• Follow the instructions on the screen.
Geotagging with locr GPS Photo
To geotag your photos automatically you have to download and install
the locr GPS Photo software.
Manual or automatic geotagging?
There are two ways to geotag your photos: The photos can be tagged
manually or automatically. For automatic geotagging you need a
datalog GPS receiver in addition to your digital camera. If you want to
view your geotagged photos on Google Maps, you have to be
connected to the internet.
Tip: Geotagging adds information to your photos. Therefore, locr
recommends
you to safe the original photos to a backup folder before geotagging
them with the locr GPS Photo software!