Rosen Entertainment Systems 7002 - Manual (Page 4)

Rosen Aviation
Document Number: 100923 Revision: D
Date: 6/8/09
Template: 4.2.3-6-FM; Revision A; 16 May, 2005 Page 4 of 21
1. INTRODUCTION
This manual describes how to install the Rosen 7” WideScreen 7002 series display onto your
aircraft. It contains everything you need to know to wire the display and confirm that it is functioning
correctly.
Note: Only trained and qualified personnel should perform installation and service.
1.1. Unpacking
The parts shipped with the 7” WideScreen 7002 series display
z Outline and Installation Drawing 7002 – specific to each display/arm combination
z 7002 display with arm
z Display Manuals CD, (P/N
9003678)
z 7” WideScreen 7002 User’s Guide – (P/N
101327) – leave in the plane
The Outline & Installation drawings— specific to each
display/arm combination —are also available at
www.rosenaviation.com .
From the Rosen Aviation home page, select SupportÆ Drawings and Pinouts, and search for
the drawing by model number or browsing by product category.
2. DISPLAY CONNECTIONS
There are several ways to connect the 7002 series display to an aircraft’s data systems.
Use the following pinout descriptions on page 2 of the Outline and Installation drawing to assist in
the wiring process. Pay close attention to the pinout information while completing wiring
connections.
Note: This display is for entertainment purposes only; connect to the non-critical power bus.