Rimage 480i - Manual (Page 7)

Important Information
Compliance Information
Product name: Rimage 480i Printer
Model: CDPR4
Notice for USA
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when this equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
This product complies with UL 60950-1.
Notice for Canada
This Class A digital apparatus complies with Canadian ICES-003 Issue 3:1997. Cet appareil
numerigue de la classe A est conforme a la norme NMB-003 du Canade.
This product complies with CAN/CSA-C22.2 No. 60950-1-03.
Notice for Europe
This product is in conformity with the EMC Directive (89/336/EEC) and the Low-Voltage Directive
(73/23/EEC) through compliance with the following European standards:
IEC 60950-1 2001, 1 st edition, EN 55022:1998 + A1:2000, EN 55024:1998, EN 61000-3-2:2000, EN
61000-3-3:1995 + A1:2001. The CE mark has been affixed in accordance with the CE Marking
Directive 93/68/EEC.
Notice for Japan
This is a Class A product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment,
radio interference may occur, in which case, the user may be required to take corrective action.
Translation:
Notice for Australia
This product complies with AS/NZS CISPR22:2002.
110761_D 3