Rimage 480i - Manual (Page 17)

Operate the Rimage 480i Printer
Place a Disc onto the Printer Tray
Use this procedure to place a disc onto the printer tray without scratching or damaging the recording surface of
the disc.
1. Press . The printer tray opens.
Note: The printer tray opens automatically if you select Print from your software application.
2. Place the disc onto the printer tray and align the hole in the disc with the small pins on the printer tray.
Pins
3. Press . The printer tray closes.
Note: If you have already selected Print from your label editing software, the print job starts when the
printer tray closes.
110761_D 13