Remove dust from the rimage 480i printer, E 22, Remove dust from the rimage 480i – Rimage 480i User Manual

Page 26: Printer, Ge 22

Rimage® 480i Printer User Guide

Remove Dust from the Rimage 480i Printer

Required tools:

Can of compressed air

1. Open

the

cable access door and disconnect the AC power adaptor to power off the Rimage 480i printer.

2. Disconnect

the

USB cable from the side of the printer.

3. Remove the dust.

a. Open

the

ink cartridge access door. The ink

cartridge carriage moves to an accessible
position on the carriage guide.

b. When the ink cartridge carriage stops, spray

the compressed air through the printer from
front to back.

c. Close

the

ink cartridge access door.

d. Press

the

tab and open the printer service

door.

e. Spray

the

compressed air from the hinges of

the printer service door to the back of the
printer.

f. Close

the

printer service door.

4. Connect

the

USB cable to the printer.

5. Connect

the

AC power adaptor to power on the printer.

Air Flow

Ink

Printer
Service
Door

Cartridge
Access
Door

110761_D