beautypg.com

Other information, 46 chapter 4 troubleshooting, Tv problems – RCA F19436 User Manual

Page 48

background image

Other Information

46

Chapter 4

Troubleshooting

Most problems you encounter with your TV you can correct by consulting the Troubleshooting list that follows.

TV Problems

TV won’t turn on

Press the POWER button.

Make sure the TV is plugged in.

Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.

Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV
turns on, check the remote control solutions on page 48.

The front panel buttons may be locked (disabled). Use the remote control to unlock the front panel controls by
selecting the Front Panel Block in the Parental Controls menu and choosing Unblock.

Buttons don’t work

The front panel buttons may be locked (disabled). Use the remote control to unlock the front panel controls by
selecting the Front Panel Block in the Parental Controls menu and choosing Unblock.

Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.

TV turns off while playing

Scheduled Off function may have been activated. Go to page 44 for instructions.

Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn the
TV on again. If this happens frequently, the voltage in your house may be abnormally high or low.

TV turns on unexpectedly

Scheduled On or Watch from the GUIDE Plus+ system may have been activated. Go to page 44 or 26 for
instructions.

Blank screen

Make sure the component connected to the TV is turned on.

Try another channel.

No sound, picture okay

Maybe sound is muted. Press the volume up button to restore sound.

Can’t select certain channel

Channel may be blocked or not approved in the Parental Controls menu.

If using a VCR, make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your
VCR).

Noisy stereo reception

The station might be weak. Check the Audio Processor in the Audio menu for sound setup. Go to page 40 for
instructions.

1571963A.04 Other

4/9/02, 12:59 PM

46