RCA F19436 - Manual (Page 10)

Connections & Setup
8 Chapter 1
TV + VCR
1. Connect your TV to your VCR
A. Connect a coaxial cable to the ANTENNA jack on your TV and to the Output Jack
on your VCR (sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect audio cables (white and red) to the
AUDIO input jacks on the back of the TV (R and L/MONO) and to the Audio
Output Jacks on the VCR (sometimes labeled OUT R L).
C. Connect the video cable (yellow) to the VIDEO input jack on the back of the TV
and to the Video Output Jack on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet, cable box, or antenna to the
Input Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM
ANT).
3. Connect the G-LINK cable to the TV
Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place one of the
wands of the G-LINK cable to work with your VCR (instructions are on page 12).
Go to page 12
IN FROM ANT
OUT TO TV
CH3
CH4
VCR
VIDEO
OUT
L R
AUDIO
TV (back panel)
ANTENNA
VIDEO AUDIO
INPUTS
G-LINK
From Cable
or Antenna
L/MONO
R
2
3
1A
1B
1C
TV
VCR
1571963A.01 Setup 4/9/02, 12:58 PM 8