RCA F19436 - Manual (Page 26)

Using the TV’s Features
24 Chapter 2
Grid Guide Action Buttons
Action buttons will change according to where you are in the
GUIDE Plus+ system. Be sure to look at the action bar before
pressing the command numbers.
When highlighting the program, the following Action
buttons appear:
• Watch Press 1 on the remote to place a timer in the
Schedule for the TV to turn on and tune to the
program highlighted in the channel listing. When the
TV turns on, the GUIDE Plus+ system will
automatically appear with the scheduled program
highlighted and tuned in the video window.
• Go To Press 2 on the remote to bring up the direct
dial box and enter the number of the channel you
want. Press OK to highlight the channel and current
program in the channel listing of the Grid guide.
Press OK again to tune to the highlighted channel. If
the video window is unlocked, it will automatically
tune to the channel.
• Record Press 3 on the remote to place a timer in the
Schedule for the VCR to record the program
highlighted in the channel listing.
If you have a cable box, changing channels on the
TV will not cause the cable box channel to change
while recording.
Record will only appear if you have set up the GUIDE
Plus+ system and specified your VCR type.
The program information window will display a
confirmation when you have successfully scheduled a
program to watch or record.
Note: If you have selected two programs to
watch or record which begin at the same time
or overlap, you will receive a timer conflict
message. You must choose between the two
programs.
When highlighting the Channel names (the left column
on the channel listing), the following Action buttons
appear:
• Lock/Unlock Press 1 to lock or unlock the video
window to either stay at one channel as you browse
the GUIDE Plus+ system (lock) or change as you
browse through different channels (unlock).
• Go To Press 2 on the remote to bring up the direct
dial box and enter the number of the channel you
want. Press OK to highlight the channel and current
program in the channel listing of the Grid Guide. If
the video window is locked, press OK to tune to the
highlighted channel. If the video window is
unlocked, it will automatically tune to that channel.
Grid guide
action buttons Grid guide
menu
selection
1571963A.02 Features 4/9/02, 12:59 PM 24