RCA F19436 - Manual (Page 45)

Using the TV’s Menu System
Chapter 3 43
Turning off Closed-Caption
1. Select Screen from the Main menu.
2. Press OK to select Closed-Caption Display.
3. Highlight Off Always and press OK. The closed
captioning is turned off and you go back to the
Screen menu.
Channel Menu
Signal Type Displays a choice list that lets you select the
current antenna type. This option does not appear when
the GUIDE Plus+ system is set up.
UHF/VHF Antenna Choose this if you are currently
using an off-air antenna for TV signals.
Cable TV Choose this if you are currently using
cable or a cable box for TV signals.
Auto Channel Search Tells the TV to search automatically
for all the channels available through the antenna input.
When the TV finds an active channel, it places it in the
Normal channel list; inactive channels (weak stations or
channels with no signal at all) will be removed from the
channel list. If you are using a cable box and have set up the
GUIDE Plus+ system, this option does not appear.
List and Labels Displays a control panel that lets you
edit your Normal channel list and choose a six-character
label for each channel. Follow the on-screen directions to
enter your channels and other information.
Channel # Use the up and down arrows to
scroll up and down through the channels
available via your antenna. You can enter the
channel number directly using the number
buttons.
Normal List Only the channels included in the
Normal list are available when you scan up and
down using channel up and down. Use the up and
down arrow buttons to indicate whether the channel
number indicated is included (Yes) or is not included
(No) in the Normal channel list.
Channel Label Use the up and down arrow buttons
to enter a six-character label for each channel. Hold
the button down to scroll quickly through the
characters. The TV can store up to 27 labels in
memory.
Auto Tuning Displays a choice list that lets you set up
the TV to automatically tune to the correct input channel
when you press a component button (VCR1, VCR2, or
SAT•CABLE) if you are using a universal remote. Go to
Chapter 4 for information on ordering a universal remote.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Exit
Tip
To enter a number greater than 99, press and hold “1” to enter
the hundreds digit, then press the two remaining numbers.
1571963A.03 Menu 4/9/02, 12:59 PM 43