Radio Shack PRO-29 - Manual (Page 21)

21
Direct Search
When you listen to a channel, you can search up or down from the cur-
rently displayed frequency.
-d- appears on the display during a direct
search.
1. Press MANUAL , the channel number, then MANUAL to select a fre-
quency stored in a channel.
2. Press t or s to search up or down from the selected frequency.
3. When the scanner stops on a transmission, press MONITOR to
store that frequency in the current monitor memory. Or, press t or s
to continue the search.
4. To hold the frequency, press LIMIT . -h- appears on the display.
To exit the hold mode and resume the direct search, press LIMIT
again.
Notes:
• You can press t or s during the hold mode to step through the
frequencies toward the upper or lower limits.
• If you tune to a search skip frequency, the display shows L/O
(see “Search Skip Memory”).
∼ ∼ ∼
∼ ∼ ∼
HI LO AIR
20-509.fm Page 21 Wednesday, August 4, 1999 1:58 PM