Radio Shack PRO-29 - Manual (Page 14)

14
UNDERSTANDING YOUR SCANNER
A LOOK AT THE KEYPAD
Your scanner’s keys might seem confusing at first, but this information
should help you understand each key’s function.
SCAN — scans through the programmed channels.
MANUAL — stops scanning and lets you directly enter a channel num-
ber.
LOCKOUT/S/S — lets you lock out a selected channel. Skips a specified
frequency during limit or direct search.
PRIORITY — sets and turns on and off priority for a particular channel.
CLEAR /. — clears an incorrect entry or enters the decimal point neces-
sary when programming frequencies.
MONITOR/0 — accesses the six monitor memories. See “Moving a Fre-
quency from a Monitor Memory to a Channel.”
WX/E (enter) — scans through the preprogrammed weather channels or
enters frequencies into channels.
KEYLOCK/ — locks/unlocks the keypad to prevent accidental entries
or turns on the display light for 15 seconds. See “Using the Keylock” and
“Using the Display Backlight.”
PROGRAM — programs frequencies into channels.
t , LIMIT, and s — search for active frequencies. See “Searching For and
Temporarily Storing Active Frequencies.”
∼ ∼ ∼
∼ ∼ ∼
HI LO AIR
20-509.fm Page 14 Wednesday, August 4, 1999 1:58 PM