Radio Shack PRO-29 - Manual (Page 18)

18
OPERATION
TURNING ON THE SCANNER AND SETTING
SQUELCH
1. Make sure that SQUELCH is turned fully counterclockwise before
you turn on the scanner.
2. Turn VOLUME clockwise until you hear a hissing sound.
3. Turn SQUELCH clockwise, just until the hissing sound stops.
Note: If you want to listen to a weak or distant station, turn SQUELCH
counterclockwise. If reception is poor, turn SQUELCH clockwise.
STORING FREQUENCIES
Follow these steps to store frequencies into channels.
1. Press MANUAL . Enter the channel number where you want to
store a frequency.
2. Press PROGRAM . PGM appears on the display to indicate the
scanner is in the programming mode.
∼ ∼ ∼
∼ ∼ ∼
HI LO AIR
20-509.fm Page 18 Wednesday, August 4, 1999 1:58 PM