RuggedCom RS416 - Manual (Page 34)

Ethernet Ports
34
RuggedCom ® RuggedServer™ RS416 Family Installation Guide rev118
5.2 Fiber Optic Ports
Depending on the order code of the product, the RS416 can be equipped with several
different types of fiber optic ports. The Transmit (TX) and Receive (RX) connections of
each port must be properly connected and matched for proper link and operation.
Modules populated on the top row of the device typically have locking mechanisms or
tabs towards the top of the unit. Modules located on the bottom row of the device have
locking mechanisms or tabs towards the bottom of the device.
The drawings in the following figures show each fiber optical connector style with a side
and top view to allow the user to identify the proper cable connection orientation. If
modules are populated on the bottom row of the device, the transceiver orientation will
be reversed (i.e. RX and TX will be reversed).
Figure 27: 10FL ST connector
Figure 28: 100FX MTRJ
connector
Figure 29: 100FX ST
connector
Figure 30: 100FX LC
connector
Figure 31: 100FX SC connector