Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital Answerer - Manual (Page 64)

T
he I
n
tegrat
ed
A
n
swer
ing Devic
e
64
Screening a call
From the base
To screen an incoming call, do the steps as
follows:
1. After the answering system answers,
the base speaker will let you hear the
calls as the machine records the
message. To adjust the volume, press
VOL/RING/ or VOL/RING/ . If you set
the answering system to Off, you
cannot screen a call.
To mute the call screen temporarily,
press
XPLAY/ STOP when the system
is answering.
2. To answer the call, press SPEAKER or
pick up the handset from the base
(when AutoTalk is set to On). If the
handset is away from the base, press
TALK/FLASH , SPEAKER or any number
key, /TONE/< or #/> (when Any Key
Answer is set to On). The answering
system will disconnect automatically.
From the handset
1. Press the SCREEN soft key when the
system is answering.
To mute the call screen, press the
MUTE soft key when the system is
answering.
2. To answer the call, press TALK/FLASH,
SPEAKER or any number key, * /TONE/
<, or #/ > (when Anykey Answer is set to
on).
To cancel the call screen, press END .
The answering system will disconnect
automatically.
Ô
NOTES
Ô
• If you press TALK/
FLASH, call screen will
be canceled and the
handset is put in talk
mode.
• If you press the SCREEN
soft key while another
handset is screening a
call, you will hear a beep
and you can not screen a
call.